Learn how to reset and/or clear the console and enable passwords from a Cisco 2900 Series Router(s) and other routers including the 1700, 3600, 3700, 1800, 2800, 3800 and the New ISR G2′s Series routers. The Cisco 2900 Series routers are by far the most...
Question: We are building C6509-E chassis that will have dual supes with the following modules VS-S720-10G-C Does this already come with the MFSC3/PFC3C WS-X6548-GE-45AF Does this already come with the WS-F6K-AF card What is the difference between this...
Question: We have a WS-C2960-48TC-L switch with three vlans connected to an 871 router. Vlan10 for servers, Vlan20 for workstations and Vlan30 for testing purpose. How can we get all three Vlans to go out the internet and have Vlan's 10 and 20 to talk...
Real World Application The Cisco 2600 Series Multi-Service router platform is a dying bread as the Cisco 2800 Series has taken its place however the 2600 series continues to be the router of choice when it comes to building your own Cisco Lab. The Cisco...
When would you need this: When you need to configure your router to operate on ADSL line provided by an ISP. Special Requirements: ADSL WAN interface on the router. Before starting, makea list of the information you will need from your service provider....
Your ISP gives you the range the network ID 192.168.40.0/24 (11000000.10101000.00101000.00000000). You know that you'd like to use a firewall / router device to limit communication between different parts of your network (servers, client computers, network...
Load-sharing is one of the clumsy areas that is full of confusing parts. In this post we should be covering its ABCs, and latter on we should be covering more parts in details. We chose the name “CEF and load sharing” as the post name due to the main...
Question: This seems like a simple concept but I'm having a hard time grasping which traffic is tagged vs that which is not tagged. We have a network of primarily WS-C3750X-24T-S switches with several VLANs, and dot1q trunks setup between the switch stacks....
Question: I have cisco 2921, zte, huawei routers..How can i get the traffic information of every interfaces of these routers. I donot have mib file of zte and huawei. So, i want a generic mib file which can monitor every interfaces of these routers Answer:...
Question: I took some very good advice & signed up for the Cisco Learning Lab. The wording on the intial switch setup instructions & the default gateway is a little confusing. For a switch the ip default-gateway command should be run in the global config...
