Question: Bought a WS-C3560X-24P-L poe and its currently running base ip services. c3560-ipbasek9-mz.122-44 Decided to download the latest version of Advanced ip services since its needed for Ccnp switch which ill be starting soon. Problem is i cant find...
Question: in fact i cracked it i think rtp aids in loop avoidance...as it ensures that each eigrp router releiably receives updates. if updates were not reliable...then the update may fail to reach the router. and the router dual process would not process...
Question: I known that IP MTU mismatch will not prevent EIGRP neighborhood, but it does impact the neighborhood operation. I have been done a lot of searching and referred to serveral Books, still not find any detailed clarification on this topic. Can...
Question: While going through the CCNP switch book of CISCO, I encountered this statement " The switch port supports one VLAN, but multiple subnets can exist on that single VLAN. " I thought that since a vlan is a broadcast domain, only one subnet can...
Question: Today I have configured IP SLA tracking for Internet link and used PBR to route my LAN traffic as per my choice. Everything went fine and working very good without any problem, just have a question how it is working. below is my topology and...
Question: I am really really confused with this. It is said that router's are more based on software thus they're slow compared to switches. Switches are more hardware based, and are very fast. Then why not make one device do all of the routing and switching....
IP RIP comes in two different versions: 1 and 2. Version 1 is a distance vector protocol and is defined in RFC 1058. Version 2 is a hybrid protocol and is defined in RFCs 1721 and 1722. The CCNA exam now primarily focuses on version 2. There are no major...
Question: I am having some issues getting ACL to function they way I would like. I have many clients on differnet vlans (vlan 6-10) and my ASA (10.1.99.254) on vlan 99 for internet access. I need vlans 6-10 to have access to the ASA for internet, but...
Question: How do I check the loop in Cisco switch? Answer: I think you are talking about forwarding loops seeming they can cause all sorts of wacky behavior in various Cisco switches. You will find basic troubleshooting and testing information below and...
Question: I have a WS-C2960S-24PS-L switch and its set only as an Access layer switch. uplinks arent even trunked. im using the native VLAN for mgmt and a different vlan for the users. the switch is being able to work as layer 2,switching packets. but...
